SENKO P 10 WATER+AIR Slim Modern, Instruction Manual

Page: 50 / 84

SENKO pellet SLIM MODERN stoves
–
Instruction manual
49
Please note that, in AUTO mode or if the room thermostat is
enabled, the electronics will reduce the stove heating power at a
temperature (room or water) which was first reached .
The stove will automatically change the heating power to keep the
set temperature constant . Warm air ventilator speed changes
automatically ( Fan:A ) to accommodate current heating power.
The stove will operate on maximum power until the set temperature is
achieved. Once the set temperature is achieved, the stove will
gradually reduce the heating power (with a delay of 2 minutes between 2
powers) to minimum. When the temperature drops below the set value,
the stove gradually returns to maximum heating power (with a delay of
1 minute between 2 powers) to reach the set temperature .
After each ignition, the stove returns to the operating mode
selected before the last shut down!
5.6.3. ECO MODE (
ECO
)
This mode is similar to automatic mode. Unlike the automatic mode,
which reduces the heating power to minimum once the set temperature is
achieved, ECO mode TURNS OFF the stove once the set room
temperature is achieved. When the room temperature drops for a
value which is factory set to
3°C
and after a predetermined stove cooling
(shut down) period has elapsed, THE STOVE IS AUTOMATICALLY
RESTARTED.
E.g. : If the current room temperature is 18
°C, and you have set the temp.
on the control panel to 23
°C, the stove will operate on max. heating power
( Fire 5 ). Once the set temp. is reached (23
°C + 1 = 24°C), the stove goes to
min. power ( Fire 1 ). Now
(from detection of 24°C) the electronics start to
countdown the time (factory set) of 20 min . If during this time (20 min) the
temperature is still more than
23°C, the stove automatically shuts down
( SHUT DOWN ).