SENKO pellet SLIM MODERN stoves
–
Instruction manual
71
In places where it was a gasket, it is necessary to put the new one
(heat-resistant) to ensure a good seal!
When cleaning the upper side of the stove, and if the firebox door or the
lid under the firebox is opened,
it is possible that a fine ash comes out
from the tubes
!
After cleaning, it is necessary to assemble everything in reverse order.
6.9. OUTPUT FLUE GAS CHANNEL
At the beginning of every heating season
clean the flue gases output
channel, i.e. the chimney.
The chimney must be regularly maintained by
an authorized individual
in order to ensure proper stove functioning.
Skipping the annual chimney maintenance is grounds for cancelling product
warranty.
6.10. INPUT PRIMARY AIR CHANNEL
At the beginning of every heating season
(and may also more frequently)
clean the
primary
air inlet
channel
(
50 mm on the stove
backside
) from dust.
Check and wipe the
airflow sensor
– see
the arrows on the sensor!
OBLIGATORY clean the sensor when
an alarm A07 occurs!
6.11. FIREBOX
Remove the dust or potential ash traces that have accumulated during
regular stove operation
twice a week
(see
figure 45a
and
b
).
Also it is necessary to
remove and
clean
the plate in the firebox
(see
figure 45c
and
d
).
If don’t,
alarm A04
will occur!!!
Figure 44
Summary of Contents for P 10 WATER+AIR Slim Modern
Page 1: ...INSTRUCTION MANUAL SN EN 719 PELLET STOVES SLIM MODERN P 8 AIR 8 kW P 10 WATER AIR 12 kW...
Page 14: ...SENKO pellet SLIM MODERN stoves Instruction manual 13 Figure 1a P 8 AIR SLIM MODERN...
Page 15: ...SENKO pellet SLIM MODERN stoves Instruction manual 14 P 10 WATER AIR SLIM MODERN Figure 1b...
Page 71: ...SENKO pellet SLIM MODERN stoves Instruction manual 70 Figure 43 a b c d e f g h...
