PRODUCT OPERATION & MAINTENANCE PROCEDURE
Model 0101
22
POP-0011– Rev. 5
TROUBLESHOOTING
Issue:
Unit is plugged in, but will not turn on.
Answer:
First check that there is power at the electrical outlet. If there is power, check the circuit breaker
inside of the Crusher. To locate the circuit breaker inside of the Crusher remove the front cover
and check if the breaker is in the off position. If it is in the off position, reset it by flipping the
switch on the breaker. If the Crusher still will not turn on, contact the SEM Service Department.
Issue:
Anvil will not move down when pushing the "RUN" button.
Answer:
Be sure that the front access door is closed and check to make sure that there is power at the
electrical outlet. If there is still an issue, contact the SEM Service Department.
Issue:
Crushing capacity has dropped or the machine jams easily.
Answer:
Contact the SEM Service Department.
