PRODUCT OPERATION & MAINTENANCE PROCEDURE
Model 0101
12
POP-0011– Rev. 5
5.
Close the access door, and press the button marked "RUN". The button will illuminate green.
(Note:
the unit will not function if the access door is open.)
The motor will activate and the hydraulic ram
will descend to pierce the SSD Media within the crushing chamber. When the ram has reached the end
of the down stroke, it will start its upward movement. Upon completion of the cycle, the green light will
extinguish and the motor will deactivate.
6.
The access door to the crushing chamber can now be opened and the SSD Media can be removed from
the crushing chamber. Note: If the media becomes stuck to the bottom of the SSD Anvil use a small
screw driver to pry it away for disposal.
7.
In the event of an emergency and you need to stop the unit, push the button labeled "STOP". A red light
will then illuminate and the hydraulic ram will return to the "Start" position. When the hydraulic ram is
in the "Start" position, the red light will extinguish and the motor will deactivate.
Note:
If the access door is opened during the crushing cycle, the hydraulic ram will stop moving. When the access
door is reclosed, the operator will need to press the "Run" or "Stop" button to restart the crushing cycle.
SSD Media with attached connector
overhanging the Wear Plate to allow
the Media to rest as flat as possible.
