PRODUCT OPERATION & MAINTENANCE PROCEDURE
Model 0101
19
POP-0011– Rev. 5
Installing the SSD Anvil
The SSD Anvil Kit consists of the following items and are pictured below:
(1) SSD Anvil
(1) SSD Anvil Shaft
(1) Wedge Lock Washer
(1) Steel Press Plate
(1) Wear Plate
1.
Thread the Anvil Shaft completely into the SSD Anvil.
2.
Place the wedge lock washer onto the Anvil Shaft.
3.
Place the SSD Anvil onto the Wear Plate to protect hands from the sharp tines of the anvil.
(Gloves
should also be worn for protection.)
Wedge Lock Washer
SSD Anvil Shaft
SSD Anvil
Wear Plate
Steel Press Plate
