PRODUCT OPERATION & MAINTENANCE PROCEDURE
Model 0101
20
POP-0011– Rev. 5
4.
Hold the SSD Anvil Assembly and Wear Plate in the crushing chamber and align the Anvil Shaft with
the hydraulic ram shaft. See picture below.
5.
With the two shafts aligned, thread the Anvil Shaft into the hydraulic ram shaft. Continue threading the
Anvil Shaft into the hydraulic ram shaft until it is hand tightened, the SSD Anvil will tighten itself with
continued use. See the picture below.
6.
Now place the Wear Plate inside of the recessed area on top of the Steel Press Plate.
SSD Anvil Assembly
installed hand tight.
The SSD Anvil placed on Wear
Plate and positioned for install
