PRODUCT OPERATION & MAINTENANCE PROCEDURE
Model 0101
6
POP-0011– Rev. 5
DETERMINING IF YOUR CRUSHER IS CAPABLE OF DESTROYING SSD MEDIA
NOTE:
SSD destruction with the Model 0101 is only possible with units that were originally purchased with the SSD
Kit Option. SSD Kits cannot be purchased separately and added to the Model 0101 later on; they must be
purchased with the Model 0101 at the time of ordering the unit.
To determine if your Crusher is capable of destroying SSD Media, look at the serial number label on the back of
the Crusher. Serial numbers beginning with the prefix of SSD are capable of destroying SSD Media as well as
rotating platter hard drives up to 1.85 inches in thickness when installed with the proper Anvil. Serial numbers
that
DO NOT
begin with SSD are only capable of destroying rotating platter hard drives up to 1.85 inches in
thickness.
Below is an example of a Model 0101 serial number tag that was purchased with the SSD Kit.
Operating instructions for destroying rotating platter hard drives can be found under the
HDD - Operation
section of this manual and operating instruction for destroying SSD Media can be found under the
SSD -
Operation
section of this manual; see the table of contents for the actual page numbers for these sections.
SECURITY ENGINEERED MACHINERY
5 Walkup Dr • Westboro, MA 01581
Ph: 800-225-9293 • www.semshred.com
MODEL:
SERIAL#
YEAR:
POWER:
AMPS:
MOTOR:
0101
SSD2729
2016
115/1/60
7.5
1/3
HP
MADE IN U.S.A
SHREDDERS • DISINTEGRATORS • DEGAUSSERS
SSD Prefix Designating
Crusher was purchased
with SSD Kit.
