PRODUCT OPERATION & MAINTENANCE PROCEDURE
Model 0101
21
POP-0011– Rev. 5
7.
With the Wear Plate on top of the Steel Press Plate, slide the Steel Press Plate into the bottom of the
crusher chamber all the way to the back of the machine, this plate will only fit inside the chamber in one
direction. The grooved milled out sections on the bottom of the Steel Press Plate will fit between the
channels at the bottom of the crushing chamber. The picture below shows both plates installed within
the crushing chamber.
Press Plate and Wear Plate installed within
the channels of the crushing chamber.
Steel Press Plate
Wear Plate
Crusher Chamber Channels
