PRODUCT OPERATION & MAINTENANCE PROCEDURE
Model 0101
3
POP-0011– Rev. 5
IMPORTANT SAFETY PROCEDURES
The SEM Model 0101 Crusher incorporates powerful, heavy duty pressing mechanisms.
Serious and
permanent injury may result if proper precautions are not followed.
1.
This equipment should never be operated by children or individuals that
are untrained or incapable of understanding these safety precautions!
2.
Do not reach into the feed opening for any reason! Never insert fingers,
hands, other extremities or objects not meant to be crushed into the feed
opening!
3.
Do not operate or come into close proximity to this equipment wearing
loose clothing, neckties, dangling jewelry or long hair which may
become entangled in the crushing chamber.
4.
Maintenance or repair of this equipment should be performed only by
trained, authorized service personnel.
5.
Always disconnect electric power (unplug) before removing or opening
any cover or other panels providing access to the internal mechanisms.
6.
Always wear gloves when working with the SSD anvil installed as it has
many sharp tines.
WARNING:
The Model 0101 is designed for crushing rotating platter hard drives up to 1.85 inches thick and SSD
Media if the unit was purchased with the SSD Kit Option. Trying to crush other objects or material
other than rotating platter hard drives or SSD Media for units with the SSD Kit Option will void the
warranty. SEM is not responsible for the failure of this unit if a customer uses the unit for something
other than what is was intended for.
