![background image](http://html1.mh-extra.com/html/seastar/optimum-eps/optimum-eps_installation-manual_1229204048.webp)
© 2014
SeaStar Solutions
Optimus Installation Manual, Rev. E
5-6
5.2 CANtrak Display
Mount the CANtrak display where it is easily visible from the helm
station. A mounting template can be found in Appendix A.
For best results:
• Mount the display vertically, or within 60 degrees of vertical.
• Ensure adequate ventilation around the unit.
• Ensure that you are able to get to the rear of the unit for harness
connections.
•
do not
mount parallel to the boat deck, unless the helm is in a
completely enclosed wheelhouse where no water can accumulate
on the face of the CANtrak.
Figure 5-5.
Figure 5-6.
DO
DO NOT
Mount vertical to hull or wall
Mount at an angle less than 60°
Mount parallel to boat deck
<60°
<60°
On a dual station vessel the
CANtrak is optional at the second
station. If you don’t install a
CANtrak at the second station you
must install a buzzer kit (HA5493).
notIce