© 2014 SeaStar Solutions
Optimus Installation Manual, Rev. E
5-5
5.1.4 EPS Rear Mount Helm
(EH1570)
See appendix a for mounting template
uSe onLy the SeLf-LockInG faStenerS provIded!
SuBStItutInG non-SeLf-LockInG faStenerS can reSuLt In
LooSenInG or SeparatIon of equIpment, cauSInG LoSS of
SteerInG controL, property damaGe, perSonaL Injury
and or death.. do not exceed 110 In-LB, (12nm) torque on
heLm nutS and BoLtS.
Install the ground strap
- install one end of the ground strap
between the nut and washer on one of the carriage bolts holding
the polished plate to the dash. Connect the other end to ground or
negative bus bar or to the battery negative terminal.
Figure 5-4.
warnInG