© 2014
SeaStar Solutions
Optimus Installation Manual, Rev. E
E-6
3.
Click
Save
on the toolbar.
Figure E-5. Click Save to Backup Configuration.
4.
Navigate to the desired backup location. Change the file name to
include the component name, revision level and the current date.
For example:
• Helm Rev B YYYY-MM-DD.ecu
• PortShiftActuator Rev A YYYY-MM-DD.ecu
5.
Click
Save
to finish.
In general, system firmware should always be updated using the
‘Update All’ utility described in section E.2
If you have a situation in which you feel you need to update the
joystick firmware on its own, please contact SeaStar Solutions
technical support.
E.5 Updating Individual Components
The CANtrak software can only be updated from the display. You will need
a USB drive (preferably empty) and a computer to perform the update.
E.6 Updating the CANtrak Software
procedure
1.
If you haven’t already done so, download and install the file
updater (section E.1).
2.
Find the Optimus Firmware folder on your desktop and open it,
then open the Color CANtrak folder.
3.
In the Color CANtrak folder you will find a .zip file. Double-click
on it to view the files in the folder.
4.
Copy all the files to the root level of your USB drive. Don’t put
them in a file folder.
5.
Plug the USB drive into the port on the back of the CANtrak. If
your system is off, turn it on now.
6.
The software update process is automatic. When prompted,
remove the USB drive from the display. The display will reboot
into the updated software version.
7.
Delete the files you copied to the USB drive. If you don’t, you
won’t be able to use the USB drive for other CANtrak functions.