![background image](http://html1.mh-extra.com/html/seastar/optimum-eps/optimum-eps_installation-manual_1229204021.webp)
3-1
© 2014 SeaStar Solutions
Optimus Installation Manual, Rev. E
3.0 INstAllAtIoN ovErvIEw
3.2 Installation Summary
To ensure proper installation and maintenance of this steering
system, please note the following:
• Installation must be performed by a SeaStar Solutions authorized
installer.
• Read and understand all installation instructions provided with
the system and its components before starting the installation.
• Read and understand all the safety information noted in this
manual and all other installation instructions..
If you need technical assistance, or wish to report an error in our
documentation, please contact SeaStar Solutions technical support:
technical Support
Web: www.seastarsolutions.com
E-mail: seastar@@seastarsolutions.com
Phone: 604.248.3858
Fax: 604.279.2202
There are several stages in the installation of the Optimus EPS
system, listed below. By reviewing this summary you will better
understand each step in the context of the entire installation.
3.1 Important Information/Technical
Support Contact
planning (Section 4)
•
Acquire a general understanding of the system and its various
components.
•
Check that the equipment supplied is available and correct.
•
Establish suitable locations for each component.
•
Plan the cabling and the hose connections.
•
Consider the power connections to the battery and the breaker
location. All wiring should be done to ABYC guidelines.
• Consider where the ignition and tach sources will come from.
• Verify that you have a dealer setup kit for purge & calibration.
•
Make a diagram of the system as it pertains to the particular
boat installation.