© 2014
SeaStar Solutions
Optimus Installation Manual, Rev. E
5-2
5.1.1 EPS Front Mount Helm
(EH1510)
See appendix a for mounting template
uSe onLy the SeLf-LockInG faStenerS provIded!
SuBStItutInG non-SeLf-LockInG faStenerS can reSuLt In
LooSenInG or SeparatIon of equIpment, cauSInG LoSS of
SteerInG controL, property damaGe, perSonaL Injury
and or death. do not exceed 110 In-LB, (12nm) torque on
heLm nutS and BoLtS.
Install the ground strap
- install one end of the ground strap
between the nut and washer on the helm’s mounting stud. Connect
the other end to ground or negative bus bar or to the battery
negative terminal.
Figure 5-1.
warnInG