![background image](http://html1.mh-extra.com/html/seastar/optimum-eps/optimum-eps_installation-manual_1229204022.webp)
© 2014
SeaStar Solutions
Optimus Installation Manual, Rev. E
3-2
networks and wiring (Section 6)
•
Review network diagrams
•
Install network tees.
•
Connect network harnesses.
•
Install circuit breakers and run the power wires.
•
Connect ignition wires.
•
Connect engine RPM source.
•
Connect autopilot if required.
commissioning (Section 8)
•
Installation checks
•
Sea trial
•
Steering adjustments
•
Warranty checklist
component Installation (Section 5)
•
Mount the helm.
•
Mount the CANtrak.
•
Mount the pump control module (PCM) and the power
steering pumps.
•
Install the SmartCylinders.
•
Install the remote service valves (if necessary).
•
Install the hoses.
purging, calibration and Setup (Section 7)
•
Purge the hydraulic system.
•
Calibrate the SmartCylinders
•
System setup with CANtrak.