RTC
®
5 PC Interface Board
Rev. 1.9 e
10 Commands And Functions
489
innovators for industry
Delayed Short
List Command
set_standby_list
Function
same as
(see above), but a list command
Call
set_standby_list( HalfPeriod, PulseLength )
Parameters
HalfPeriod
half
of the stand-by output period as an unsigned 32-bit value.
1 bit equals 1/64
µ
s.
Allowed range: [0 … +(2
32
–
1)]
PulseLength
Pulse length of the stand-by pulses as an unsigned 32-bit value.
1 bit equals 1/64
µ
s.
Allowed range: [0 … (2
32
–
1)]
RTC
®
4
RTC
®
Ctrl Command set_start_list
Function
opens the list buffer for writing of list commands and sets the input pointer to the start of
the desired list (“List 1” or “List 2”). The next list command will be stored at this address
and all further list commands at the subsequent addresses in the selected list.
Call
set_start_list( ListNo )
Parameter
ListNo
Number of the list in which the input pointer should be set, as an unsigned
32-bit value
permissible values: [uneven: “List 1“, even: “List 2“]
Comments
• The
set_start_list
command is synonymous with
for
Pos
= 0.
• Alternatively, the commands
and
(with no parameter)
can be used.
RTC
®
4
RTC
®
5 unchanged functionality
References
Ctrl Command set_start_list_1
Function
see
Call
set_start_list_1()
RTC
®
4
RTC
®
5 unchanged functionality
References
Ctrl Command set_start_list_2
Function
see
Call
set_start_list_2()
RTC
®
4
RTC
®
5 unchanged functionality
References
