SATELLINE-EASy Pro 35W
User Guide v.1.4
19
5
USER INTERFACE
5.1
LED-indicators
There are five (5) LED indicators on the front panel of the radio modem, and they give an
indication of the status of the serial port and the radio interface:
Description of the LED-
indicators:
5.2
Display and push buttons
SATELLINE-EASy Pro 35W includes a LCD-display with a backlight. In the
Data Transfer Mode
the
display will show the operating settings of the radio modem, for example the radio field strength
and the supply voltage. By using the push buttons and the LCD-display, it is possible to change
most of the settings of the radio modem, without the need for an external terminal. The display
backlight illuminates automatically as soon as a button is pressed.
The radio modem will shift into the
Programming Mode
by pressing the SETUP-push button (
).
When activated the menu shows a listing of the changeable parameters.
With the help of the main menu, sub-menus can be selected which in turn can be used to change
the settings. You can always return to the previous higher level of the menu structure by pressing
the CANCEL (or BACK) push button (
●
). Pressing the
or
button changes settings or moves
in the menu. Selections are confirmed by pressing the SELECT or SET button. In case of numerical
values the digit to be changed is selected by pressing the NEXT button (see following page).
LED
Indication
OFF
Red
Orange
Green
RTS
RTS-line status
Inactive
Active
CTS
CTS-line status Inactive
Active
TD
TD-line status
No data
Data
Test Tx active
RD
RD-line status
No data
Data
CD
Radio status
No signal
Transmission
Noise
Reception
