SATELLINE-EASy Pro 35W
User Guide v.1.4
59
value have been edited. Toggle-type parameters (typically with ON/OFF choices modifications
have to be confirmed by pressing the ”SELECT”- or ”SET”-button.
This is the display in
Data Transfer
Mode
.
TX and RX frequencies are set to
468.525.000 MHz.
Compatibility is Satel 3AS.
TX power is 35W.
Channel spacing is 25 kHz.
Reference frequency is 438.000.000
MHz. Serial PORT 1 settings are
19200, N, 8, 1.
Signal strength info is displayed on the
upper left-hand corner:
- RSSI value Y
-102
(here -102 dBm)
of the last received message or
- current noise level e.g.
n-115
Battery level respectively on the upper
right corner.
Y-102 11.5V
TX 468.52500 MHz
RX 468.52500 MHz
Compatibility
Satel 3AS
TX power: 35W
Spacing:25kHZ
Ref438.00000MHz
COM1:19200N81
TX:35W SETUP
After pressing the ”SET-UP-button the
display will show the main menu, which
is a list of modifiable parameters.
Pressing the
▲▼
buttons the cursor
moves upwards and downwards. When
the cursor
>
is placed beside the
desired selection, entry into sub-menu
is done by pressing the SELECT-
button.
>Radio frequency
Radio settings
Addressing
Port 1
Port 2
Handshaking
Additional
Tests
Factory setup
LCD-Contrast
EXIT
▲▼
Select
9.3.1
Changing frequency (frequency of the active TX/RX radio channel)
Press
▲
or
▼
until the cursor
> points to “Radio frequency”
–selection and press ”Select”
to move onto the next
submenu.
>Radio frequency
Radio settings
Addressing
Port 1
Port 2
Handshaking
Additional
Tests
Factory setup
Contrast
EXIT
▲▼
Select
5 sec
5 sec
5 sec
