SATELLINE-EASy Pro 35W
User Guide v.1.4
70
In case you need more information on the time delays related to the use of SL-commands, please
contact the manufacturer.
In order to get information of the latest and/or special SL-commands please contact SATEL Oy.
9.4.1
Frequency
Command
Effect and description of command
SL&FR=nnn.nnnnn Set RX-frequency to nnn.nnnnn MHz
SL&FT=nnn.nnnnn Set TX-frequency to nnn.nnnnn MHz
SL&F=nnn.nnnnn Set both RX&TX-frequency to same nnn.nnnnn MHz
SL&FR?
Get RX- frequency (response 'nnn.nnnnn MHz')
SL&FT?
Get TX- frequency (response 'nnn.nnnnn MHz')
SL&F?
Get RX&TX- frequencies (response TX nnn.nnnnn MHz, RX nnn.nnnnn MHz)
SL&C?
Get Reference (Center) frequency (response 'nnn.nnnnn MHz')
SL&C=nnn.nnnnn Set Reference (Center) frequency to nnn.nnnnn MHz
SL&+=nn
Set RX&TX- frequency nn channels above reference frequency
Frequency = Reference fre nn * Channel spacing, where nn=[0...Number of
channels/2]
SL&-=nn
Set RX&TX- frequency nn channels below reference frequency
Frequency = Reference frequency – nn * Channel spacing, where nn=[0…Number of
channels/2]
SL&N?
Get current RX&TX- frequency deviation from reference frequency as channels
(Frequency – Center frequency)/Channel spacing (response ‘+nn’ or ‘-nn’)
SL&W?
Get channel spacing (response ‘nn.n kHz’)
SL&D=x
Set operational mode of the radio. The different values of x are:
”S” = Single Channel
”D” = Dual Channel
”R” = Reverse Dual Channel
Note! Use this command only, if the setup of the frequency bands matches the Dual
Channel operation.
SL&D?
Get operational mode of the radio. The response is one of the following:
”S” = Single Channel
”D” = Dual Channel
”R” = Reverse Dual Channel
Note! Use this command only, if the setup of the frequency bands matches the Dual
Channel operation.
