SATELLINE-EASy Pro 35W
User Guide v.1.4
13
1.1
Default settings
SATELLINE-EASy Pro 35W is shipped with the following default settings (unless otherwise
specifically agreed):
DEFAULT VALUES OF THE ADJUSTABLE SETTINGS (user can change settings later on)
Setting
Default value
Range
Radio frequency
Operating TX frequency
438.000 MHz
Range: 403 - 473 MHz
Operating RX frequency
438.000 MHz
Range: 403 - 473 MHz
Reference Frequency
438.000 MHz
Range: 403 - 473 MHz
Channel Spacing
12.5 kHz
Range: 12.5, 20 or 25 kHz
Radio settings
Tx Power
35 W
Range: 10, 20, 25 and 35 W
Signal threshold
-115 dBm
-80 … -118 dBm
FCS
OFF
ON/OFF
Tx-Start Delay
0 ms
0-65535 ms
Radio Compatibility
SATEL 3AS
SATELLINE-3AS, Option1=PCC 4-FSK,
Option 2=PCC GMSK, 3=TrimTalk 450s (P),
4=TrimTalk450s (T), 5=PCC-FST
Addressing
RX Address
OFF
ON/OFF
TX Address
OFF
ON/OFF
RX addressing to RS port
OFF
ON/OFF
TX address auto switch
OFF
ON/OFF
Serial port 1
Status
ON
ON/OFF
Interface
RS-232
Fixed
Data speed
9600 bps
300, 600, 1200, 2400, 4800, 9600, 19200,
38400 bps
Data bits
8
7, 8, 9
Parity bits
None
None, Even, Odd
Stop bits
1
1, 2
Handshaking
Handshaking lines apply to the DATA-port.
CTS
Clear to send
Clear to send, TX buffer state
CD
RSSI threshold
RSSI- threshold, Data on channel,
Always ON, External Antenna Control
RTS
Ignored
Ignored, Flow Control, Reception Control
Pause length
3 bytes
3 … 255 bytes
Additional setup
Error correction
OFF
ON/OFF
Error check
OFF
ON/OFF
Repeater
OFF
ON/OFF
SL-commands
ON
ON/OFF
Priority
TX
RX/TX
FullCR16 Check
OFF
ON/OFF
Routing
OFF
ON/OFF
Tests
OFF
ON/OFF
The power cable (+V
b
and GND) must be connected to a power supply with a proper output
voltage (+9…+16
V
DC
) and with a minimum output current of 15A.
