SATELLINE-EASy Pro 35W
User Guide v.1.4
29
7.9.2
Configuration in Programming menu
The correct radio compatibility mode can be changed in the Programming mode submenu
Radio
settings ->Radio compatibility Mode
:
Radio compatibility
-------------------------
1) Satelline-3AS
2) PCC 4-FSK
3) PCC GMSK
4) TRIMTALK GMSK, RX fitted to Pacific Crest transmitters
5) TRIMTALK GMSK, RX fitted to Trimble transmitters
6) PCC-FST
7.9.3
Configuration by using SL commands
“SL@S=” command selects the compatibility mode:
•
”SL@S=0” sets SATELLINE-3AS (default).
•
”SL@S=1” sets PCC-4FSK
•
”SL@S=2” sets PCC-GMSK
•
”SL@S=3” sets TRIMTALK GMSK
, RX fitted to Pacific Crest transmitters
•
“SL@S=4” sets TRIMTALK GMSK,
RX fitted to Trimble transmitters
•
“SL@S=5” sets PCC-FST
The modem responds with “OK” message if the requested mode is supported or “ERROR” if the
mode is not allowed.
“SL@S? enquires the active mode. The modem responds with a number:
•
“0” if the mode is SATEL 3AS
•
“1” if the mode is PCC-4FSK
•
“2” if the mode is PCC-GMSK
•
“3” if the mode is TRIMTALK GMSK
, RX fitted to Pacific Crest transmitters
•
“4” if the mode is TRIMTALK GMSK,
RX fitted to Trimble transmitters
•
“5” if the mode is PCC-FST
7.9.4
Settings
In order to use the Pacific Crest/TRIMTALK modes implemented in SATELLINE modems:
PACIFIC CREST modems must have:
•
Protocol Mode =
•
Transparent w/EOT Timeout (when using Pacific Crest modulations)
•
TrimTalk 450s (when using TRIMTALK GMSK modulation)
•
Transparent FST
•
Modulation Type depends on the system
•
GMSK (default, always selected when using TRIMTALK 450s mode)
•
4-Level-FSK
