SATELLINE-EASy Pro 35W
User Guide v.1.4
11
1
SATELLINE-EASy Pro 35W technical specifications
SATELLINE-EASy Pro 35W complies with the following international standards:
o EN 300 113-2 (RF-requirements)
o EN 301 489 (EMC-requirements)
o EN 60950 (Safety Standard)
o FCC CFR47 part 90
RECEIVER
TRANSMITTER
Note!
Frequency Range
403...473 MHz
Tuning Range
70 MHz
Channel Spacing
12.5 kHz / 20 kHz / 25 kHz
Programmable
Spurious Radiations
< 2 nW
According to EN 55022 and
FCC CFR47 part 90
Duty Cycle 35W *)
100% (@22°C) 20 min
100% (@35 °C) 13 min
40% No limit
Duty Cycle 10W *)
100% (@22°C) No limit
100% (@35 °C) 50 min
40% No limit
Frequency Error
Tolerance
< 1 kHz
Sensitivity
-114 dBm @ 12.5 kHz
-111 dBm @ 25 kHz
(BER < 10 E-3)
FEC ON
See: Note 1
Co-channel Rejection
>-12 dB
FEC ON
Adjacent Channel
Selectivity
> 47 dB @12.5 kHz
> 52 dB @ 25 kHz
FEC ON
Selectivity
67 dB @ ±50 kHz
FEC ON
Intermodulation
Attenuation
> 60 dB
FEC ON
Blocking
> 86 dB
FEC ON
Spurious Rejection
> 60 dB
FEC ON
Power Consumption
< 1.8 W
110 W typical@ 35 W,
min 12 Vdc
Power Save Mode
Consumption
SLEEP State:0,4 W typical
Communication Mode
Half-Duplex
Type of Emission
F1D
Carrier power
10, 20, 25, 35 W / 50 ohm
Adjacent Channel
Power
According to EN 55022 and
FCC CFR47 part 90
Carrier power stability
+ 2 dB / - 3 dB
*) If high output power is used continuously or with a high cycle, the equipment generates excess heat. The output
power is automatically decreased when necessary to prevent overheating. Typical operating times are shown in the
chart with different output powers and duty cycles @ 22°C and 35 °C (see chapter 3.2).
Note 1
Due to radio electronic design, the receiver is about 6 – 15 dB less sensitive on the following frequencies:
403.000, 416.000, 429.000, 442.000, 455.000, 468.000, 409.5875 and 469.200 MHz.
