SATELLINE-EASy Pro 35W
User Guide v.1.4
62
The display will now show
New Ref freq
438.00000 MHz
The cursor
> will now blink under the first digit of
the value indicating the (this first digit cannot be
edited). To move onto the next digit, press ”
Next”.
Previous steps are repeated four (4) times.
Press
▲
or
▼
, until the last changeable digit has
the desired value and confirm changes by pressing
”Set”.
T
he following information will be displayed
for a few seconds.
Ch accepted
468.52500 MHz
The radio modem will acknowledge changes if
they are between band limits. The display will
return automatically to display the main menu (if
the entered frequency is not acceptable an error
message will be displayed).
New common freq
468.52500 MHz
Cancel
▲ ▼
Next
9.3.3
Changing radio settings (transmitter power and receiver sensitivity)
Press
▲
or
▼
until
the cursor > points
to “Radio settings”
selection and press
”Select” to move on
to the submenu.
Radio frequency
>Radio settings
Addressing
Port 1
Port 2
Handshaking
Additional
Tests
Factory setup
LCD-Contrast
Exit
▲ ▼
Select
Press
▲
or
▼
until
the cursor > points
to the setting to be
modified and press
”Change”.
>TX level
Sig.
Threshold
TX start
delay
Compatibility
Back
▼
Change
MODIFYING TRANSMITTER OUTPUT
POWER:
The displayed list consists off all possible
values of transmitter output power. Press
▲
or
▼
until the cursor > points to the desired
value and press ”SET”.
NOTE: The starting position of the cursor
indicates the previously set value.
10W
20W
25W
>35W
Cancel
▼
Set
