Sartorius Combics 2 CAIXS2, Operating Instructions Manual

Page: 90 / 180

90 Operating Instructions Combics CAIXS2
Operation
Combining Application Programs
The following table shows how the applications described can be combined. The
basic
weighing
function is available at all times; it does not need to be combined
with a computational function.
Select programs one after the other: Toggle using the
D
key.
Application 1 Application 2 Application 3
(Basic Function) (Monitoring Function) (Cumulative-value Function)
Counting – Totalizing
Counting Checkweighing Totalizing
Counting Checkweighing –
Counting Classification –
Neutral measurement – Totalizing
Neutral measurement Checkweighing Totalizing
Neutral measurement Checkweighing –
Neutral measurement Classification –
Animal weighing – Totalizing
Animal weighing Checkweighing Totalizing
Animal weighing Checkweighing –
Animal weighing Classification –
Weighing in percent – Totalizing
Weighing in percent Checkweighing Totalizing
Weighing in percent Checkweighing –
Weighing in percent Classification –
– – Net-total formulation
– Checkweighing Totalizing
Example
: “Portioning" (counting
z
, checkweighing
O
with totalizing
s
)
Configuration:
Application 1: Counting (
COUNT.
)
Application 2: Checkweighing (
CHECK.
)
Application 3: Totalizing (
TOTALIZ
): Saved value: Net + Calculated (3.23.3)
Autosave: On (3.16.2)
Source of data: Application 2 (3.22.2)
Setup: Printout:
PRT PROT
7.8. Printer 1: “Total: Print when FN pressed,” then
select the menu line items of your choice.
t
Place empty container on the scale.
)
.
t
Tare scale.
This is not required if the automatic tare function is active. The tare weight is
saved automatically when you place the container on the platform.
.