Sartorius Combics 2 CAIXS2, Operating Instructions Manual

Page: 128 / 180

128 Operating Instructions Combics CAIXS2
Menu Structure
PRINT
Automatic printing 4.10
MANUAL
manual 4.10.1*
AUTOMAT
automatic 4.10.2*
Applic.3 off
APPLIC/ APPLIC.3 NET.TOT.
Net-Total
MIN.INIT
Minimum load for application 3.6
1 DIGIT
1 scale interval 3.6.1*
2 DIGIT
2 scale intervals 3.6.2
... see “
Weighing
"
1000 d
1000 scale intervals 3.6.10
PRT.SAV.
Individual/Component printout when saved 3.17
OFF
Automatic printing off 3.17.1
EACH.TIM
. Print the entire standard print configuration every time with
the
O
key function 3.17.2*
ONCE
Print the entire standard print configuration once with the
O
key 3.17.3
Applic./Applic.3/TOTALIZ
Totalizing
MIN.INIT
Minimum load for application 3.6
1 DIGIT
1 scale interval 3.6.1*
2 DIGIT
2 scale intervals 3.6.2
... see “
Weighing
"
1000 d
1000 scale intervals 3.6.10
AUTO.SAV
Autosave 3.16
OFF
Off 3.16.1*
ON
On 3.16.2
PRT.SAV.
Individual/Component printout when saved 3.17
OFF
Automatic printing off 3.17.1
EACH.TIM.
Print the entire standard print configuration every time with
the
O
key function 3.17.2*
ONCE
Print the entire standard print configuration once with the
O
key 3.17.3
VAL.FROM
Value source for automatic saving 3.22
APPL. 1
Application 1 3.22.1*
APPL. 2
Application 2 3.22.2
SAV.VAL.
Save value 3.23
NET
Net 3.23.1*
CALCUL.
Calculation 3.23.2
NET+CAL
Net and calculated 3.23.3
APPLICATION / AUT.TARE
Automatic taring
AUT.TARE
1st Weight tared 3.7
OFF
Off 3.7.1*
ON
On 3.7.2
APPLICATION/MIN.TARE
Minimum load for automatic taring and automatic printing
MIN.TARE
Minimum load for automatic taring and printing 3.5
1 DIGIT
1 scale interval 3.5.1*
2 DIGIT
2 scale intervals 3.5.2
... see “
Weighing
"
1000 d
1000 scale intervals 3.5.10
APPLICATION / AUT.STRT
For"On" automatic start of application with the last saved initialization data
AUT.strt
Automat. start of application with the last saved settings 3.8
AUTOMAT
Automatic (on) 3.8.1*
MANUAL
manual (off) 3.8.2
APPLIC./CLER.CF
Selective deleting with the
c
key
CLER.CF
Selective deleting with the
c
key 3.24
ALL.APPL.
Deletes all applications 3.24.1*
SEL.APPL
Only deletes selected application 3.24.2
APPLIC. / TARE.FNC
Tare function
TARE.FNC
Tare function settings 3.25
NORMAL
Can add a preset tare if tare value is available;
however no tare function possible 3.25.1*
SPECIAL
When a preset tare is entered, the tare value is deleted;
however, tare function activation is possible 3.25.2