Sartorius Combics 2 CAIXS2, Operating Instructions Manual

Page: 127 / 180

Operating Instructions Combics CAIXS2 127
Menu Structure
DEC.PLCS
Decimal place in displayed result 3.10
WITHOUT
none 3.10.1
1 Dec.Pl
1 decimal place 3.10.2
2 Dec.Pl.
2 decimal places 3.10.3
3 Dec.Pl.
3 decimal places 3.10.4
SAVE WT.
Parameter for saving weight values 3.11
STABIL
With stability* 3.11.1
ACC.STAB
With increased stability* 3.11.2
REF.WP
Reference weighing instrument 3.13
NO WP
No weighing platform selected 3.13.1*
WP 1
Weighing platform 1 3.13.2
WP 2
Weighing platform 2 3.13.3
CALC.DIS
Calculated values display 3.15
RESIDUE
Residue 3.15.1*
LOSS
Calculation 3.15.2
APPLIC./ APPLIC.2 OFF
APPLIC./ APPLIC.2 CHECK.WG
Checkweighing
CHECK.RG
Checkweighing range 4.2
30-170%
30 to 170% 4.2.1*
10-MAX.L
10% to infinity 4.2.2
CTRL.SET
Activate SET control output 4.3
OUTPUT
“SET" output 4.3.1*
OP.READY
Ready to operate (for process control systems) 4.3.2
OUTP.ACT
Port lines 4.4
OFF
off 4.4.1
ALWAYS
always 4.4.2
STABIL
on at stability 4.4.3
CHECK.RG
on within checkweighing range 4.4.4*
STAB.CHK
On at stability within checkweighing range 4.4.5
INPUT
Parameter input 4.5
TAR.MN.MX
Min, Max, target value 4.5.1*
TARG.PER.
Only target value with percent limits 4.5.2
TAR.A.PER
Target value with asymmetrical percent limits 4.5.3
TAR.TOL
Target value with relative tolerances 4.5.4
AUT.PRNT
Automatic printing 4.6
OFF
off 4.6.1*
ON
on 4.6.2
OK
Only values within tolerance 4.6.3
NOT OK
Only values outside tolerance 4.6.4
APP.ZERO
Checkweighing toward zero 4.7
OFF
off 4.7.1*
ON
on (Symbol
Y
is displayed) 4.7.2
APPLIC./APPLIC.2 CLASS.
Classification
PARAM.1
Parameter 1
MIN.INIT
Minimum load for application 3.6
1 DIGIT
1 scale interval 3.6.1*
2 DIGIT
2 scale intervals 3.6.2
... see “
Weighing
"
1000 d
1000 scale intervals 3.6.10
PARAM.2
Parameter 2
CTRL.SET
Activate SET control output 4.3
OUTPUT
“SET" output 4.3.1*
OP.READY
Ready to operate (for process control systems) 4.3.2
OUTP.ACT
Port lines 4.7
OFF
off 4.7.1
ALWAYS
always 4.7.2
STABIL
on at stability 4.7.3*
QTY.
Number of classes 4.8
3 CLASS
3 classes 4.8.1*
5 CLASS
5 classes 4.8.2
INPUT
Parameter input 4.9
WEIGHTS
Weight values 4.9.1*
PERC.TAG
Percentage values 4.9.2