Panasonic GN Series Hardware Manual Download

Page: 1 / 68

ACGM0192V1EN 4/2010

Asia Pacific

Japan

North America Europe

Global Network

Europe

Headquarters



Panasonic Electric Works Europe AG

Rudolf-Diesel-Ring 2, 83607 Holzkirchen, Tel. +49 (0) 8024 648-0, Fax +49 (0) 8024 648-111,

www.panasonic-electric-works.com

Austria



Panasonic Electric Works Austria GmbH

Rep. of PEWDE, Josef Madersperger Str. 2, 2362 Biedermannsdorf, Tel. +43 (0) 2236-26846, Fax +43 (0) 2236-46133,

www.panasonic-electric-works.at

PEW Electronic Materials Europe GmbH

Ennshafenstraße 30, 4470 Enns, Tel. +43 (0) 7223 883, Fax +43 (0) 7223 88333, www.panasonic-electronic-materials.

com

Benelux



Panasonic Electric Works

Sales Western Europe B.V.

De Rijn 4, (Postbus 211), 5684 PJ Best, (5680 AE Best), Netherlands, Tel. +31 (0) 499 372727, Fax +31 (0) 499 372185,

www.panasonic-electric-works.nl

Czech Republic



Panasonic Electric Works Czech s.r.o.

Prumtyslová 1, 34815 Planá, Tel. (+420-)374799990, Fax (+420-)374799999, www.panasonic-electric-works.cz

France



Panasonic Electric Works

Sales Western Europe B.V.

Succursale française, 10, rue des petits ruisseaux, 91371 Verrières le Buisson, Tél. +33 (0) 1 6013 5757, Fax +33 (0) 1

6013 5758, www.panasonic-electric-works.fr

Germany



Panasonic Electric Works Europe GmbH

Rudolf-Diesel-Ring 2, 83607 Holzkirchen, Tel. +49 (0) 8024 648-0, Fax +49 (0) 8024 648-111,

www.panasonic-electric-works.com

Hungary



Panasonic Electric Works Europe AG

Magyarországi Közvetlen Kereskedelmi Képviselet, 1117 Budapest, Neumann János u. 1., Tel. +36(0)1482 9258,

Fax +36 (0) 1482 9259, www.panasonic-electric-works.hu

Ireland



Panasonic Electric Works UK Ltd.

Dublin, Tel. +353 (0) 14600969, Fax +353 (0) 14601131, www.panasonic-electric-works.co.uk

Italy



Panasonic Electric Works Italia s.r.l.

Via del Commercio 3-5 (Z.I. Ferlina), 37012 Bussolengo (VR), Tel. +39 (0) 456752711, Fax +39 (0) 456700444,

www.panasonic-electric-works.it

Nordic Countries



Panasonic Electric Works Nordic AB

Sjöängsvägen 10, 19272 Sollentuna, Sweden, Tel. +46 859476680, Fax +46 859476690, www.panasonic-electric-works.se

PEW Fire & Security Technology Europe AB

Jungmansgatan 12, 21119 Malmö, Tel. +46 40697-7000, Fax +46 40697-7099, www.panasonic-fire-security.com

Poland



Panasonic Electric Works Polska sp. z o.o.

Al. Krakowska 4/6, 02-284 Warszawa, Tel. +48 (0) 22 338-11-33, Fax +48 (0) 22 338-12-00, www.panasonic-electric-

works.pl

Portugal



Panasonic Electric Works España S.A.

Portuguese Branch Office, Avda Adelino Amaro da Costa 728 R/C J, 2750-277 Cascais, Tel. +351 214812520,

Fax +351 214812529

Spain



Panasonic Electric Works España S.A.

Barajas Park, San Severo 20, 28042 Madrid, Tel. +34 913293875, Fax +34 913292976,

www.panasonic-electric-works.es

Switzerland



Panasonic Electric Works Schweiz AG

Grundstrasse 8, 6343 Rotkreuz, Tel. +41 (0) 417997050, Fax +41 (0) 417997055, www.panasonic-electric-works.ch

United Kingdom



Panasonic Electric Works UK Ltd.

Sunrise Parkway, Linford Wood, Milton Keynes, MK14 6 LF, Tel. +44(0) 1908 231555, +44(0) 1908 231599,

www.panasonic-electric-works.co.uk

North & South America

USA



PEW Corporation of America

629 Central Avenue, New Providence, N.J. 07974, Tel. +1-908-464-3550, Fax +1-908-464-8513,

www.pewa.panasonic.com

Asia Pacific / China / Japan

China



Panasonic Electric Works (China) Co., Ltd.

Level 2, Tower W3, The Tower Oriental Plaza, No. 2, East Chang An Ave., Dong Cheng District, Beijing 100738, Tel.

(010) 5925-5988, Fax (010) 5925-5973, www.pewc.panasonic.cn

Hong Kong



Panasonic Electric Works

(Hong Kong) Co., Ltd.

RM1205-9, 12/F, Tower 2, The Gateway, 25 Canton Road, Tsimshatsui, Kowloon, Hong Kong, Tel. (8520) 2956-3118,

Fax (0852) 2956-0398

Japan



Panasonic Electric Works Co., Ltd.

1048 Kadoma, Kadoma-shi, Osaka 571-8686, Japan, Tel. (06)-6908-1050, Fax (06)-6908-5781

http://panasonic-electric-works.net

Singapore



Panasonic Electric Works Asia Pacific Pte. Ltd.

101 Thomson Road, #25-03/05, United Square, Singapore 307591, Tel. (06255)-5473, Fax (06253)-5689

China

Panasonic Electric Works Global Sales Companies

TOUCH TERMINALS

GN Series

Hardware Manual

Summary of Contents for GN Series





































































Search results

Summary of Contents for GN Series

Reviews:

Related manuals for GN Series

Brands by name

Popular brands

Panasonic GN Series, Hardware Manual

Search results

Summary of Contents for GN Series

Reviews:

Related manuals for GN Series

Brands by name

Popular brands