Sartorius Combics 2 CAIXS2, Operating Instructions Manual

Page: 61 / 180

Operating Instructions Combics CAIXS2 61
Operation
– Manual start with user-defined number of subweighing operations: Place the
sample on the platform and enter the number of weighing operations using the
keypad. Press the
r
key to save the number entered and begin weighing.
– Automatic start with preset number of subweighing operations: Measurement
begins when you place the first sample on the platform, provided the start
conditions are met.
Preparation
t
Open the
APPLIC./APPLIC.1/ANIM.WG
menu.
Available parameter settings
* = Factory setting
MIN.INIT
Minimum load for initialization 3.6
1-digit
1 scale interval* 3.6.1
2 digit
2 scale intervals 3.6.2
5 digit
5 scale intervals 3.6.3
10 dig.
10 scale intervals 3.6.4
20 dig.
20 scale intervals 3.6.5
50 dig.
50 scale intervals 3.6.6
100 dig.
100 scale intervals 3.6.7
200 dig.
200 scale intervals 3.6.8
500 dig.
500 scale intervals 3.6.9
1000 d
1000 scale intervals 3.6.10
START
Start averaging 3.18
manual
Manual* 3.18.1
AUTOMAT
Automatic 3.18.2
ACTIVTY
Animal activity 3.19
0.1 perc.
0.1% of animal/object 3.19.1
0.2 perc.
0.2% of animal/object* 3.19.2
0.5 perc.
0.5% of animal/object 3.19.3
1 PERC.
1% of animal/object 3.19.4
2 PERC.
2% of animal/object 3.19.5
5 PERC.
5% of animal/object 3.19.6
10 PERC.
10% of animal/object 3.19.7
20 PERC.
20% of animal/object 3.19.8
50 PERC.
50% of animal/object 3.19.9
100 PERC.
100% of animal/object 3.19.10
PRINT
Autom. printout of results 3.20
manual
Off* 3.20.1
automat
On 3.20.2
DIS.UNLD
Static display of result after load removed 3.21
CLEARED
Display is fixed until 3.21.1
unload threshold reached*
PRESENT
Fixed display until
c
is pressed 3.21.2
)
t
To save the setting, press the
)
key.
( (
...
t
To exit setup: Press the
(
key several times.
Minimum load for initialization
You can set the minimum load here, i.e., the load that must be placed on the
weighing platform in order to carry out the application. If the load on the platform
is too light, the following will occur:
– error code
Inf 29
appears
– the weighing platform is not initialized
– the preset reference sample quantity is saved.
Setting:
Applic./Applic.1/ANIM.WG/Min.init
menu item 3.6.