Sapido Ultimate WE-1120 User Manual Download Page 93

Page: 93 / 266

3.5.5

Printer Server

The WE-1120 has USB ports for connection with printers to be shared on the local area

network. Follow the below steps to setup your PC to connect to a Printer server.

1. Enable Printer Server:

Check Enable for applying printer server.

2. Enable Printer Access From WAN:

Allow printer can access from WAN side by

checking on Enable for this item.

3. Printer Model:

The printer model will be shown when plug the USB printer.

4. Printer Name:

Input the name of printer you like.

5. Printer Description:

Input the description of printer as your demand.

6. Apply & Cancel

Click on

Apply

button to continue. Click on

Cancel

button to clean the setting on this

page.

Besides above setting finished, the printer setting on PC also needs to be set as follows.

Summary of Contents for Ultimate WE-1120











































































































































































































































































Search results

Summary of Contents for Ultimate WE-1120

Reviews:

Brands by name

Popular brands

Sapido Ultimate WE-1120, User Manual

Search results

Summary of Contents for Ultimate WE-1120

Reviews:

Brands by name

Popular brands