Sapido Ultimate WE-1120 User Manual Download Page 103

Page: 103 / 266

103

3.6.4

Profile Save

To backup the current configuration setting or load the backup data, also you can restore

the WE-1120 to default setting by this function.

1. Save Settings To PC:

Click on “

Save

” button for saving the configuration setting into

assigned location.

2. Load Settings From PC:

Click on “

Browse

” button for searching the saving

configuration from hard drive, and then click on “

Load

” button to load all the setting into

the router.

3. Restore To Factory Default Settings:

After you have tired other methods for

troubleshooting your network, you may choose to “

Restore

” the WE-1120 to the factory

default settings.

4. Apply

Click on

Apply

button to continue.

Summary of Contents for Ultimate WE-1120











































































































































































































































































Search results

Summary of Contents for Ultimate WE-1120

Reviews:

Brands by name

Popular brands

Sapido Ultimate WE-1120, User Manual

Search results

Summary of Contents for Ultimate WE-1120

Reviews:

Brands by name

Popular brands