Sapido Ultimate WE-1120 User Manual Download Page 111

Page: 111 / 266

111

3.6.9

Folder Management

Easy to check all the USB storage devices connected to your WE-1120, view the entire

data folder inside each storage devices, and you can do the disk formatting / partition via

click on the button in this page.

Select the USB Disk and click on

button for refresh all disks before you do disk

partition, and the

Unplug

button will appear.

To partition/format the disk, please select the disk and click on

Format

button.

Moreover, if you want to view the data inside the disk, please go to “

3.5.1 FTP Sever

Setup

” to enable FTP server and then click on “

Disk Explorer

” to view all the disks

folders inside the device.

Summary of Contents for Ultimate WE-1120











































































































































































































































































Search results

Summary of Contents for Ultimate WE-1120

Reviews:

Brands by name

Popular brands

Sapido Ultimate WE-1120, User Manual

Search results

Summary of Contents for Ultimate WE-1120

Reviews:

Brands by name

Popular brands