Sapido Ultimate WE-1120 User Manual Download Page 59

Page: 59 / 266

Radius with 802.x:

Check this circle to enable Radius client function.

WPA Rekey Timer

: Allows for the session keys to be refreshed over time, minimizing

the amount of data that is encrypted with the same session key.

RADIUS Server IP:

The IP address of RADIUS server.

RADIUS Server Port:

The UDP port number that the RADIUS server is listed. The

default value is 1812.

Shared Secret:

The RADIUS server and client share a secret that is used to

authenticate the messages sent between them. You must configure both sides to sue

the same shared secret.

13. Apply & Cancel

Click on

Apply

button to save the settings. If you want to clean the settings, please click

Cancel

button. The functional button,

Cancel

can take effect after clicking on

Apply

button.

Summary of Contents for Ultimate WE-1120











































































































































































































































































Search results

Summary of Contents for Ultimate WE-1120

Reviews:

Brands by name

Popular brands

Sapido Ultimate WE-1120, User Manual

Search results

Summary of Contents for Ultimate WE-1120

Reviews:

Brands by name

Popular brands