Sapido Ultimate WE-1120 User Manual Download Page 83

Page: 83 / 266

3.5.4

Web Camera Server

The WE-1120 has built-in Web Camera Server. By connecting web camera to the router, it

allows user to monitor their home or office from remote locations. Motion Detection function

also been built-in and allows user to use webcam to detect any motion at their home or

office and send email alert with captured images.

3.5.4.1 Web Camera Server Basic Setting

1. Enable Webcam Server:

Allow using this function for checking on Enable.

2. Access from WAN:

Allow webcam can access from WAN side by checking on Enable

for this item.

3. Image format:

There are CIF & QCIF format can be selected for webcam.

4. Preview:

Click on this button, you can preview the image from webcam.

5. Record Setting:

Please see the detail advance setting in next page.

6. Apply & Cancel

Click on

Apply

button to continue. Click on

Cancel

button to clean the setting on this

page.

Summary of Contents for Ultimate WE-1120











































































































































































































































































Search results

Summary of Contents for Ultimate WE-1120

Reviews:

Brands by name

Popular brands

Sapido Ultimate WE-1120, User Manual

Search results

Summary of Contents for Ultimate WE-1120

Reviews:

Brands by name

Popular brands