Sapido Ultimate WE-1120 User Manual Download Page 108

Page: 108 / 266

108

3.6.7

UPnP Setting

UPnP

（

Universal Plug and Play

，

UPnP

）

allows users to connect their UPnP-enabled

broadband router, printer server and other devices right to the network with

zero-configuration, meaning easier setup for installing the device on the network. The

automatic discovery feature enables the device to obtain an IP address, present and

describe itself to other devices and PCs on the network without having to install drivers, and

then configure and use those devices.

1. Enable/Disable UPnP:

Select “

Enable

” to activate this service.

2. Apply & Cancel

Click on

Apply

button to add the settings into the list table. Click on

Cancel

button to

clean the setting on this page.

Summary of Contents for Ultimate WE-1120











































































































































































































































































Search results

Summary of Contents for Ultimate WE-1120

Reviews:

Brands by name

Popular brands

Sapido Ultimate WE-1120, User Manual

Search results

Summary of Contents for Ultimate WE-1120

Reviews:

Brands by name

Popular brands