Sapido Ultimate WE-1120 User Manual Download Page 51

Page: 51 / 266

restarted or if the connection is dropped.

6. DNS

If ISP provided you DNS information, please select “

Specify DNS Server IP

” and input

the DNS information into the blank; otherwise, select “

No Default DNS Server

”.

7. Apply & Cancel

Click on

Apply

button to continue. Click on

Cancel

button to clean the setting on this

page.

3.3.1.4 PPTP

If you applied for a

PPTP

connection type from ISP, please follow the steps to setup your

WAN connection.

1. PPTP

Select connect to PPTP by on demand, Always Online or Manual connects.

2. PPTP Account

Input the PPTP Account supplied by ISP. If you don’t know, please check with your ISP.

Summary of Contents for Ultimate WE-1120











































































































































































































































































Search results

Summary of Contents for Ultimate WE-1120

Reviews:

Brands by name

Popular brands

Sapido Ultimate WE-1120, User Manual

Search results

Summary of Contents for Ultimate WE-1120

Reviews:

Brands by name

Popular brands