97
F0.06
Operation command channel
0
~
2
0
This function code is used for choosing the physical channel for receiving operation commands like run and stop.
0: keypad run command channel
Controlled with keys in keypad like
RUN
,
STOP/RESET
,
M-FUNC
.
1: terminal run command channel
Controlled by muli-function terminals defined as FWD, REV, JOG forward, JOG reverse.
2: communication run command channel
Controlled with communication method via upper computer.
Note
:
Even during running status, the run command channel can be changed by modifying this function code set value. Please
set carefully!
F0.07
Main freq. source A
0
~
9
9
0: digital set 1 (
, encoder)
The frequency is originally set as F0.12, but can be adjust with key
or encoder. The modified frequency value
will be saved to F0.12 after power down (if no need for saving, set the F0.10 as 1).
1: digital set 2 (up/down terminal adjust)
The initial value of frequency is F0.13. The running frequency can be changed by on/off of multi-functional terminal
defined as UP/DOWN (for details check F7 group function code of X terminal increase/decrease item). When UP and
COM terminal are both closed, frequency increase; when DOWN and COM terminal are both closed, frequency decrease;
when UP/COM terminal and COM terminal are both open or closed at the same time, the frequency remains unchanged.
If set frequency saving upon power down, the modified frequency value will be saved to F0.13 after power down. The
modifying rate of running frequency by UP/DOWN terminal can be set by function code F7.12.