PROGRAMMED PLAYBACK
Your digital disk camera allows you to program the playback order so that you can play back a
slide show of still images and video clips in any order you wish. Programming the playback allows
you to play back still images and video clips together.
Creating a playback program
Follow the procedure below to set the order of the slide show. To do this you will create a
program that specifies the files to play back. The program will then be saved onto the disk.
Preparation
œ
Move the write-protect tab on the disk to the write-enabled position (see page 155).
œ
Turn the mode selector dial to
ê
to display the Option Screen.
Caution
œ
Before creating a program, be sure to move the write-protect tab on the disk to the
write-enabled position. If the tab is set to the write-protect position (the
è
mark), the program
cannot be saved and the programmed playback cannot be performed.
1
Press the arrow button to select the program
playback icon
ù
and press the SET button.
œ
The Program Playback Selection Screen appears.
To return to the Option Screen: Select “EXIT”
To create a playback program: Select “VIEWER”
2
Press
l
on the arrow button to select “ VIEWER” and
press the SET button.
œ
The Program Playback Setting Screen appears.
œ
“PROGRAM” is selected initially.
Program playback icon
Option Screen
OPTIONAL
FUNCTIONS
Program Playback Selection Screen
SPECIAL
FUNCTIONS
EXIT
ÄVIEWER
Program Playback Setting Screen
ÄPROGRAM
PLAYBACK
PROG DEL
EXIT
141
English
