Sanyo DSR-5709P, Instruction Manual

Page: 10 / 236

English
9
2
NAMES AND FUNCTIONS OF PARTS
Front panel
1. POWER indicator
Lights up when the power is on.
2. FULL indicator ( J P.86)
Flashes when the amount of available memory in the hard
disk’s recording area drops to the percentage specified using
menu settings.
In addition, recording stops automatically when no more
memory is available, and the FULL indicator switches to a
permanently lit condition.
The indicator can then be turned off by performing “AREA
FULL RESET”.
3. ERROR indicator ( J P.17)
This indicator flashes if the HDD or fan begins to malfunction.
4. LOCK indicator ( J P.118)
Lights up when operations have been locked.
The LOCK indicator turns off when the lock condition is
cancelled.
5. ALARM indicator
Flashes during alarm recording.
The ALARM indicator lights up during pre-alarm recording.
6. USB terminal (
J
P.57)
Connects to a recordable CD/DVD drive or a USB memory.
For compatibility, refer to the SANYO homepage.
http://www.sanyosecurity.com/
When the USB port on the rear panel is also connected at the
same time, only the front port will be used preferentially.
7. [CAMERA SELECT] buttons and indicators
When one or more cameras have been connected to the
VIDEO IN terminals on the digital video recorder’s rear panel
and the appropriate [CAMERA SELECT] button is pressed,
the corresponding indicator lights up and the video feed from
that camera is displayed on-screen.
z During quad, multi 9, or multi 16 screen display:
The indicators corresponding to the cameras being
displayed on the monitor light up.
z During video loss:
The indicator starts to flash.
z If an alarm occurs:
The indicator for the corresponding camera starts to flash.
8. [FUNC.] button
Activates dome camera operation mode. The operation of
other buttons changes. (
J P.150) Use also for advanced
menu functions.
9. [QUAD] button and indicator ( J P.23)
Displays video in quad screens. The indicator lights up while
in quad screen display.
The indicator turns off when using a different screen display
mode.
10. [MULTI] button and indicator ( J P.24)
Displays video in multi 9 or multi 16 screen display.
The indicator lights up while in multi 9 or multi 16 screen
display.
The indicator turns off when using a different screen display
mode.
The DSR-5709P can only display video in nine screens.
11. [MON2] button and indicator ( J P.26)
If the [MON2] button is pressed while a monitor is connected
to the MON2 output terminal on the rear panel, it is possible to
change the monitor 2 video. The [CAMERA SELECT],
[SEQUENCE] and [QUAD] buttons can be used. The indicator
lights up when this mode is selected.
12. [PLUS] button ( J P.24)
Changes the video from a single camera to quad screen size
during multi 9, multi 16, full screen or quad screen display.
For DSR-5709P, this operation is available when in multi 9,
quad and full screen display.
13. [MENU] button and indicator
Displays the menu screens (i.e., setting screens), and the
indicator lights up while any of these screens is being
displayed.
SEARCH
6 7 8 1 2 3
4 5
14 15 16 9 10 11 12 13
MENU
MENU
EXIT/OSD
ZOOM
SEQUENCE MARK/COPY SHUTTLE HOLD
TIMER ALARM
PLAY/STOP
ENTER AF
IRIS
FOCUS
STILL
REC/STOP
POWER FULL ERROR LOCK ALARM
MULTI
FUNC.
TOUR SEQUENCE
AUTO PAN
USB
PLUS MON 2
QUAD
PRESET
JOG
SHUTTLE
C
LE
AR
ENT
ER
PAN
ZOOM/I/FO
MENU
RESET
1 2 3 4 5
7
9 8
11 12
13 14 15
17 16 18
25
19
22 23 24 21
20
26
6
10
DSR-5716P