Sanyo DSR-5709P, Instruction Manual

Page: 39 / 236

38
English
SEARCHING FOR RECORDED VIDEO 5
INTRODUCTION
SE
TTINGS
N
E
T
WO
R
K
CO
NT
RO
L
NETW
ORK
O
P
E
RATION
NE
T
W
ORK
S
E
TTINGS
OTHE
R
OPE
RATION
(7) BOOKMARK SEARCH (
J
P.42)
You can select to play a
bookmarked video from the
bookmark list.
(The [BOOKMARK SEARCH]
function is available only on the
digital video recorder, not
available through network
operation.)
Use the following procedure to perform an alarm search or
alarm thumbnail search by defining the period (month, week,
day or time) of the alarm recorded video.
1
Press the [SEARCH] button while the
digital video recorder is recording or
stopped.
The SEARCH indicator lights up and the <SEARCH> screen
is displayed.
2
Turn the jog dial to select “ALARM LOG
SEARCH” and then turn the shuttle dial
clockwise.
The <ALARM LOG SEARCH> screen is displayed.
On the DSR-5709P, cameras No. 01-09 are displayed.
3
Turn the shuttle dial clockwise.
The “TERM” setting flashes.
4
Turn the jog dial to select “TERM” and
then turn the shuttle dial clockwise.
The screen display changes to reflect the specified period.
Press the
or [ALARM] button to change the month/
week/date/time.
[Settings] ( ‹ indicates default setting)
5
Turn the jog dial to select the date, time
or minute and then turn the shuttle dial
clockwise.
The selected day (or hour or minutes) is indicated with a
yellow frame.
Alarm recording areas are indicated in red and areas with no
recordings in gray.
Reselecting the area cancels the original selected area.
„ To confirm normal recording
Press the [FUNC.] button for approximately 3 seconds to
search for normal recording. A blue mark is displayed at the
top left of the screen, and normally recorded parts are
displayed in blue. (The search for normal recording may take
some time.)
To abort the search, turn the shuttle dial counter-clockwise.
z If “MONTH” is selected in step 4 above, each frame
represents one day. If “WEEK” is selected, four frames
represent one day. If “DAY” is selected, each frame
represent one hour. If “HOUR” is selected, each frame
represents two minutes.
Alarm log search
<BOOKMARK SEARCH>
NO DATE TIME CH
0000001 10-05 19:15 01
0000002 10-06 18:40 02
0000003 10-07 18:52 03
0000004 10-07 18:55 03
0000005 10-08 22:05 01
0000006 10-10 21:59 05
0000007 10-15 21:33 04
0000008 10-20 21:25 06
MOVE:JOG SELECT:SHUTTLE
<SEARCH>
ALARM LOG SEARCH ->
ALARM SEARCH ->
ALARM THUMBNAIL SEARCH ->
TIME/DATE SEARCH ->
ARCHIVE AREA SEARCH ->
MOTION DETECTION SEARCH ->
BOOKMARK SEARCH ->
MOVE:JOG SELECT:SHUTTLE
SEARCH
< ALARM LOG SEARCH > TERM:MONTH
01-01-07 1 5 10 15 20 25 30
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
SEARCH:ALARM
Camera
number
Date, day or time
< ALARM LOG SEARCH > TERM:MONTH
01-01-07 1 5 10 15 20 25 30
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
SEARCH:ALARM
Setting Description
‹ MONTH Displays one month.
WEEK Displays one week.
DAY Displays one day.
HOUR Displays one hour.
< ALARM LOG SEARCH > TERM:DAY
01-01-07 00 06 12 18
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
SEARCH:ALARM
< ALARM LOG SEARCH > TERM:DAY
01-01-07 00 06 12 18
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
SEARCH:ALARM