Sanyo DSR-5709P, Instruction Manual

Page: 113 / 236

112
English
GENERAL SET 3
INTRODUCTION
SE
TTINGS
NE
T
W
O
R
K
CO
NT
RO
L
NETW
ORK
O
P
E
RATION
NE
T
W
ORK
S
E
TTINGS
OTHE
R
OPE
RATION
You can determine whether or not to display the information
including date and time on the monitor. The default setting is
“ON” for every item. Specify “OFF” as appropriate.
1
Press the [MENU] button.
The MENU indicator lights up and the <MAIN MENU> is
displayed.
2
Turn the jog dial to select “3.GENERAL
SET” and then turn the shuttle dial
clockwise.
The <GENERAL SET> screen is displayed.
3
Turn the jog dial to select “1.DISPLAY
SET” and then turn the shuttle dial
clockwise.
The <DISPLAY SET> screen is displayed.
(1) DATE
Displays and hides the date.
(2) TIME
Displays and hides the time.
(3) QUALITY
Displays and hides the picture quality mode.
(4) AUDIO
Displays and hides the audio recording mode.
(5) ALARM COUNT
Displays and hides the number of current alarms.
(6) ALARM TYPE
Displays and hides the type of alarm recording.
(7) TITLE
Displays and hides the camera titles.
(8) VIDEO LOSS
Specifies whether or not to display the “VIDEO LOSS”
message when video signal is interrupted.
(9) NO VIDEO
Specifies whether or not to display the “NO VIDEO” message
for the channels with which a camera is not connected.
z Settings (1) to (7) are indicated in the operation display
area on the monitor.
<Example>
4
Turn the shuttle dial clockwise.
“ON” flashes for “DATE”.
5
Turn the jog dial to select “ON ”or
“OFF” and then turn the shuttle dial
clockwise.
The cursor moves to “TIME” and “ON” flashes. Select “ON” or
“OFF” using the jog dial.
6
Use the same procedure to set the other
items to “ON” or “OFF”.
Setting data display
MENU
<DISPLAY SET>
DATE : ON
QUALITY : ON
ALARM COUNT : ON
TITLE : ON
NO VIDEO : ON
CONTROL OUT
OUTPUT 1 : NON REC
OUTPUT 2 : ARCHIVE FULL
TIME : ON
AUDIO : ON
ALARM TYPE : ON
VIDEO LOSS : ON
(1)
(3)
(5)
(7)
(9)
(2)
(4)
(6)
(8)
01-01-07 00:00:00 REC 1% EN A ALARM 0000000
02
(1) (2) (6) (3)(4) (5)
(7)
<DISPLAY SET>
DATE : ON
QUALITY : ON
ALARM COUNT : ON
TITLE : ON
NO VIDEO : ON
CONTROL OUT
OUTPUT 1 : NON REC
OUTPUT 2 : ARCHIVE FULL
TIME : ON
AUDIO : ON
ALARM TYPE : ON
VIDEO LOSS : ON
<DISPLAY SET>
DATE : ON
QUALITY : ON
ALARM COUNT : ON
TITLE : ON
NO VIDEO : ON
CONTROL OUT
OUTPUT 1 : NON REC
OUTPUT 2 : ARCHIVE FULL
TIME : ON
AUDIO : ON
ALARM TYPE : ON
VIDEO LOSS : ON