S&C BankGuard PLUS, Setup Instructions

Page: 3 / 50

3 1011-530
Understanding
Safety-Alert
Messages
There are several types of safety-alert messages which may appear throughout this
instruction sheet as well as on labels attached to the IntelliTEAM II Interface Module.
Familiarize yourself with these types of messages and the importance of the various
signal words, as explained below.
Following Safety
Instructions
If you do not understand any portion of this instruction sheet and need assistance, con-
tact your nearest S&C Sales Office or call S&C Headquarters at (773) 338-1000, Monday
through Friday between 8:30 AM and 5:00 PM Central Standard Time. (In Canada, call
S&C Electric Canada Ltd. at (416) 249-9171.)
Replacement
Instructions and
Labels
If you need additional copies of this instruction sheet, contact your nearest S&C Sales
Office, S&C Headquarters, or S&C Electric Canada Ltd.
It is important that any missing, damaged, or faded labels on the equipment be replaced
immediately. Replacement labels are available by contacting your nearest S&C Sales
Office, S&C Headquarters, or S&C Electric Canada Ltd.
!
DANGER
“DANGER” identifies the most serious and immediate hazards which will likely re-
sult in serious personal injury or death if instructions, including recommended pre-
cautions, are not followed.
!
WARNING
“WARNING” identifies hazards or unsafe practices which
can
result in serious per-
sonal injury or death if instructions, including recommended precautions, are not fol-
lowed.
!
CAUTION
“CAUTION” identifies hazards or unsafe practices which can result in minor personal
injury or product or property damage if instructions, including recommended precau-
tions, are not followed.
!
NOTICE
“NOTICE” identifies important procedures or requirements that, if not followed, can
result in product or property damage if instructions are not followed.
!
NOTICE
SAFETY INFORMATION
Thoroughly and carefully read this in-
struction sheet before programming
and operating your IntelliTEAM II In-
terface Module.