MU-201 GPS/GPRS Nano Tracker User Manual
Copyright © 2011 San Jose Technology, Inc. All Rights Reserved.
19
Set up Answer Call Mode
User can use Answer Call (Voice Mode) command to define the response when MU-201 is receiving an incoming call.
The device can answer the call automatically or hang up the call and send current location message.
Setup Format: #
「
username
」
,
「
Password
」
,
「
Function Mode
」
,
「
0~3
」
*
Command: #username,0000,8,1*
Note: If user has enabled “Security Phone Book” function, MU-201 will verify whether the caller’s number is in the Security
Phone Book. If not, MU-201 will not react to the incoming call.
SMS/ COTA Command
Description
#
Start sign.
username
Default ID of the device.
If you have changed the user name, please use the updated one.
0000
Default password.
If you have changed the password, please use the updated one.
8
Mode 8 defines the Voice Mode setup.
0 /1 The device will answer the incoming call automatically.
2 The device will hang up the call and respond its current location to caller’s cell phone.
1
3 The device will hang up the call and respond its current location to the defined route.
*
End sign.
Table: Answer Call Mode Setup Format Description
Situation
Message Reply
Setup Succeeds
<OK>Monitor mode 0/1;auto answer call, V3.793;56%
<OK>Monitor mode 2;reply to caller V3.793;56%
<OK>Monitor mode 3;reply by router,V4.156;100%
Emergency Mode
<FAIL>PANIC ON; Command not Allow!,V4.091;98%
Table: Answer Call Mode Setup Response Description
