MU-201 GPS/GPRS Nano Tracker User Manual
Copyright © 2011 San Jose Technology, Inc. All Rights Reserved.
44
Enable Geo-Fence
User can enable or disable the Geo-Fence detection by this short command without inputting longitude and latitude if the
coordinates are predefined.
Setup Format: #
「
username
」
,
「
Password
」
,
「
Function Mode
」
,
「
Parameter
」
*
Command: #username,0000,gf1,1*
Table: Geo-Fence Coordinate Enable Format Description
Table: Geo-Fence Coordinate Enable Response Description
SMS/ COTA Command
Description
#
Start sign.
username
Default ID of the device.
If you have changed the user name, please use the updated one.
0000
Default password.
If you have changed the password, please use the updated one.
gf1
Mode “gfx” defines the Geo-Fence setup mode. User can input gf1, gf2, gf3, gf4…gf10 to
define each Geo-Fence range. There are 10 sets of Geo-Fence can be predefined.
0 It will disable the Geo-Fence detection.
1 It will trigger the event when the tracker is outside of the Geo-Fence.
2 It will trigger the event when the tracker is inside of the Geo-Fence.
1
3 It will trigger the event when the tracker is either outside or inside of the Geo-Fence.
*
End sign.
Situation
Message Reply
Setup Succeeds
<OK>GF ONgf1 SETUP, V3.793;56%
Emergency Mode
<FAIL>PANIC ON; Command not Allow!,V4.091;98%
