Sanav MU-201 User Manual Download

Page: 26 / 68

MU-201 GPS/GPRS Nano Tracker User Manual

Set up SOS Event Report Interval

Use this SMS/COTA command to predefine the SOS report interval by following the format below.

Setup Format: #

「

username

」

「

Password

」

「

Function Mode

」

「

SOS report interval

」

「

Total number of SOS reports

」

Command: #username,0000,15,30,3*

Note: SOS report interval ranges from 1~65000 seconds; SOS report times ranges from 1~9999 times.

Table: SOS Alarm Report Interval Setup Format Description

Table: SOS Alarm Report Interval Setup Response Description

SMS/ COTA Command

Description

Start sign.

username



Default ID of the device.



If you have changed the user name, please use the updated one.

0000



Default password.



If you have changed the password, please use the updated one.

Mode 15 defines the SOS Report Interval setup mode.

It defines the report interval (in this case, one report per 30s) when SOS is triggered.

It defines how many times the SOS report will be sent to the assigned route.

(in this case, 3 times)

End sign.

Situation

Message Reply

Setup Succeeds

<OK>Panic setup, V3.793;56%

Emergency Mode

<FAIL>PANIC ON; Command not Allow!,V4.091;98%

Summary of Contents for MU-201




































































Search results

Summary of Contents for MU-201

Reviews:

Related manuals for MU-201

Brands by name

Popular brands

Sanav MU-201, User Manual

Search results

Summary of Contents for MU-201

Reviews:

Related manuals for MU-201

Brands by name

Popular brands