MU-201 GPS/GPRS Nano Tracker User Manual
Copyright © 2011 San Jose Technology, Inc. All Rights Reserved.
32
Set up Address Language
The user can change the SMS polling address language by setting language codes.
The default address language is in en-us (English United States), the user can send the following command to define the
report in another language:
Setup Format: #
「
username
」
,
「
Password
」
,
「
Function Mode
」
,
「
Report Format Code
」
*
Command: #hl,zh-tw*
Note: Some language codes might be not available, the actual supported codes relies on map service provider.
SMS/ COTA Command
Description
#
Start sign.
hl
Mode “hl” defines the SMS Polling Address setup mode.
zh-tw
The language code, such as: en-us, zh-tw,ar-ae…etc.
*
End sign.
Table: Address Setup Format Description
Situation
Message Reply
Setup Succeeds
<OK>google hl=zh-tw,V4.133;100%
Emergency Mode
<FAIL>PANIC ON; Command not Allow!, V4.133;100%
Table: Address Setup Response Description