Sanav MU-201 User Manual Download Page 59

Page: 59 / 68

MU-201 GPS/GPRS Nano Tracker User Manual

Reset to Default Setting

Use this command to reset the device to default/factory setting. It will recover all the current parameters to default values

includes username and password.

Setup Format: #

「

username

」

「

Password

」

「

Function Mode

」

Command: #username,0000,9*

SMS/ COTA Command

Description

Start sign.

username

Default ID of the device.

If you have changed the user name, please use the updated one.

0000

Default password.

If you have changed the password, please use the updated one.

Mode 9 defines the Default Setting setup mode.

End sign.

Table: Default Setting Setup Format Description

Situation

Message Reply

Setup Succeeds

<OK>Reset to default, V3.793;56%

Emergency Mode

<FAIL>PANIC ON; Command not Allow!,V4.091;98%

Table: Default Setting Setup Response Description

Summary of Contents for MU-201




































































Search results

Summary of Contents for MU-201

Reviews:

Related manuals for MU-201

Brands by name

Popular brands

Sanav MU-201, User Manual

Search results

Summary of Contents for MU-201

Reviews:

Related manuals for MU-201

Brands by name

Popular brands