MU-201 GPS/GPRS Nano Tracker User Manual
Copyright © 2011 San Jose Technology, Inc. All Rights Reserved.
45
If the user likes to enable all the 10 sets of Geo-Fence coordinates at once, it can be done by entering the following
SMS/COTA command:
Setup Format: #
「
username
」
,
「
Password
」
,
「
Function Mode
」
*
Command: #username,0000,gf,on*
SMS/ COTA Command
Description
#
Start sign.
username
Default ID of the device.
If you have changed the user name, please use the updated one.
0000
Default password.
If you have changed the password, please use the updated one.
gf
Mode “gf” defines the Geo-Fence setup mode.
on
To enable Geo-Fence function (all 10 sets)
off
To disable Geo-Fence function (all 10 sets)
read To read Geo-Fence GF function code (all 10 sets)
on
clear To clear Geo-Fence coordinates and function setting (all 10 sets)
*
End sign.
Table: All Geo-Fence Coordinate Enable Format Description
Situation
Message Reply
Setup Succeeds
<OK>GF ON, V3.793;56%
<OK>GF OFF, V3.793;56%
<OK>I60;T3;M0;G1=3;G2=0;G3=0;G4=0;G5=0;G6=0;G7=0;G8=0;G9=0;G10=0,V3.7
93;56%
<OK>GF CLEAR, V3.793;56%
Emergency Mode
<FAIL>PANIC ON; Command not Allow!,V4.091;98%
Table: All Geo-Fence Coordinate Enable Response Description
