Sanav MU-201 User Manual Download

Page: 28 / 68

MU-201 GPS/GPRS Nano Tracker User Manual

Stop SOS Report (Exit from SOS Mode)

While the device is in SOS Mode, user can use this SMS/COTA command to stop the SOS report and Exit from SOS mode.

Setup Format: #

「

username

」

「

Password

」

「

offpanic

」

Command: #username,0000,offpanic*

Note: User can exit SOS Mode by long pressing the SOS button again. Please refer to Hardware General Introduction.

SMS/ COTA Command

Description

Start sign.

username



Default ID of the device.



If you have changed the user name, please use the updated one.

0000



Default password.



If you have changed the password, please use the updated one.

offpanic

Mode offpanic defines the SOS Exit mode.

End sign.

Table: Exit from SOS Mode Setup Description

Situation

Message Reply

Setup Succeeds

<OK>Panic OFF to normal mode, V3.793;56%

Table: Exit from SOS Mode Response Description

Summary of Contents for MU-201




































































Search results

Summary of Contents for MU-201

Reviews:

Related manuals for MU-201

Brands by name

Popular brands

Sanav MU-201, User Manual

Search results

Summary of Contents for MU-201

Reviews:

Related manuals for MU-201

Brands by name

Popular brands