Sanav MU-201 User Manual Download Page 51

Page: 51 / 68

MU-201 GPS/GPRS Nano Tracker User Manual

Set up Geo-Fence Event Report Interval

User can use this command to define the Geo-Fence Report interval (period) and times (frequency). The command is

applied to all the 10 Geo-Fence coordinate sets.

Setup Format: #

「

username

」

「

Password

」

「

Function Mode

」

「

Intervals (sec.)

」

「

Total number of reports

」

Command: #username,0000,17,60,3*

SMS/ COTA Command

Description

Start sign.

username

Default ID of the device.

If you have changed the user name, please use the updated one.

0000

Default password.

If you have changed the password, please use the updated one.

Mode 17 defines the Geo-Fence Report Interval setup mode.

Time Interval (period) of Event Report. Ranges from 0 to 65000.

Times (frequency) of Event Reports that will be sent automatically.

End sign.

Table: Geo-Fence Interval Setup Format Description

Situation

Message Reply

Setup Succeeds

<OK>GF report setup,V3.793;56%

Emergency Mode

<FAIL>PANIC ON; Command not Allow!,V4.091;98%

Table: Geo-Fence Interval Setup Response Description

Summary of Contents for MU-201




































































Search results

Summary of Contents for MU-201

Reviews:

Related manuals for MU-201

Brands by name

Popular brands

Sanav MU-201, User Manual

Search results

Summary of Contents for MU-201

Reviews:

Related manuals for MU-201

Brands by name

Popular brands