Sanav MU-201 User Manual Download Page 15

Page: 15 / 68

MU-201 GPS/GPRS Nano Tracker User Manual

Request IMEI Number

IMEI stands for International Mobile Equipment Identification, a unique number for identifying mobile devices validity in

GSM network.

As above stated, each device has a unique IMEI number. Entering the command as the following allows user to check the

IMEI number of the device for network registration and tracking.

Setup Format: #

「

username

」

「

Password

」

「

Function Mode

」

Command: #username,0000,imei*

SMS/ COTA Command

Description

Start sign.

username

Default ID of the device.

If you have changed the user name, please use the updated one.

0000

Default password.

If you have changed the password, please use the updated one.

imei

Mode “imei” defines the device IMEI number request mode.

End sign.

Table: IMEI Number Request Format Description

Situation

Message Reply

Setup Succeeds

<OK>Read IMEI=357566000046804,V4.097;98%

Table: IMEI Number Request Response Description

Summary of Contents for MU-201




































































Search results

Summary of Contents for MU-201

Reviews:

Related manuals for MU-201

Brands by name

Popular brands

Sanav MU-201, User Manual

Search results

Summary of Contents for MU-201

Reviews:

Related manuals for MU-201

Brands by name

Popular brands